Chlororubber paint with silicate additive for anti-slip effect. Quick drying.
Based on acrylic resins with great resistance to acids and alkalis.
Indoor and outdoor use.
Dilutes and cleans with QUICK DRYING Thinner (D-17).
15 litres
Finish: Semi-Gloss
Colours: Pearl Grey (09.502),
Jai-Alai Green (09.503),
Tennis Red (09.504)
Concrete surfaces must be resistant stable and dry, grease and other strange components free and forge it during, at least, 4 weeks.
Concrete surfaces must be rough and grease stains, rubber, curative agents, whitewash and any other strange components free
Grease and rubber stains must be removed with thinners or detergents, rinse with water afterwards. Use sandblast if they do not disappear.
Whitewash and curative agents must be removed with sandblast or milling, aspiring the dust afterwards. On silice free concretes, use 10% chloridic acid and clean with pressure water . On asphaltic surfaces, besides clean them properly, it is recommended to wait 15 days between the product application and the painting process.
INDOOR-OUTDOOR
Recommended to paint and protect surfaces that require anti-slipping solutions. (industrial installations, sport facilities, etc.) Not suitable for pitches or bituminous asphalts.
Brush, roller or pneumatic air spray gun. The room temperature must be at least 3ªC over dew point. Avoid condensations. During the paint appliction and mature process, temperature must be over +10ª. Relative humidity must not exceed 80%. There must not be ascendent humidity. Before application, confirm always surface humidity. Aplpy at least 2 porduct coats. Protect from humidity, condensation and water during, at least, the first 24 hours. Do not allow water builds-up on the surface. Product glossy might differ depending on the surface absortion and temperature.