Base Synthetic Enamel to paint.
Satin finish.
Indoor use.
Dilutes and cleans with MINERAL Turpentine (D-16). EPD certified (Environmental Product Declaration): allows for sustainable building according to LEED and BREEAM standards.
4 / 0,750 litres
JUNOMALTE Enamel Satin
On wooden surfaces, prime with HANGERS Synthetic Sealer. Sand in each coat.
On ferric amd steel surfaces, clean and prime with METALEX Primer.
On aluminium and galvanised, clean and prime with MULTISUPPORT Primer.
On cement, Plaster and Plasterboard surfaces, prime with Synthetic Sealer.
INDOOR
Recommended for metallic and wooden surfaces (doors, windows, furniture, etc.).
Brush or enamel roller. Ready to use. Apply spreading the paint properly. When painting with pneumatic air spray gun, dilute with a QUICK DRYING Thinner (D-17) 10-15%, not exceeding 30-35 dry microns per coat in both cases.
When using orange, yellow or red colours, which are less matt, it is recommended to protect the base with similar covering tones.
Applications with over the recommended thicknesses, may cause wrinkling, drying and repainting problems. Outdoor, apply, at least, 2 enamel coats. More aggressives Thinners (D-17, D-45) might cause wrinkling problems and delay the internal drying.